News Stories

3D glasses spreading conjunctivitis: BMC

[Linah Baliga, The Times of India]

MUMBAI: Thinking of catching the latest 3D movie? You may have to reconsider your plans. According to the BMC, 3D glasses provided at theatres and multiplexes are one of the main reasons for the rise in cases of conjunctivitis in the city. 

The civic body has also issued an advisory to theatres and multiplexes to exercise caution. “People will be instructed not to use spectacles that have been used by others for watching 3D movies. 

All theatre owners have been asked to sterilize these glasses or provide disposable spectacles to viewers,” said Manisha Mhaiskar, additional municipal commissioner at the civic standing committee meeting on Wednesday. She added that cases of conjunctivitis rose in areas where 3D movies have been released. 

“The BMC has decided to issue notices to the managements of theatres and multiplexes where 3D movies are running,” she said. 

A 3D film is a motion picture that enhances the illusion of depth perception. Derived from stereoscopic photography, a regular motion picture camera system is used to record the images as seen from two perspectives, and special projection hardware or eyewear are used to provide the illusion of depth when viewing the film. 

The issue on isolated cases of conjunctivitis was raised by Rajul Patel, chairperson, BMC’s health committee. He said that with the onset of monsoon, there are chances of the viral infections spreading on a large scale. “Erratic weather and fluctuating temperature are the main reasons for the spread of conjunctivitis. However, use of the same 3D spectacles by many viewers may be exacerbating the situation. At least five cases of conjunctivitis are being reported at major hospitals like Sion, KEM and Nair every day. The BMC has issued an advisory to the theatres to either sterilize the spectacles or discard them after single use. I’ve demanded to issue notices to theatres,” he said. 

According to the civic advisory, conjunctivitis is a viral infection that is more common during monsoon. It spreads through air, contact with articles like handkerchiefs and towels used by infected persons, lack of personal hygiene or even in a crowd. Red eye, irritation and watering of the eyes are the common symptoms of conjunctivitis, which can be treated in six to seven days. 

Sunil Punjabi, CEO, Cinemax Cinemas said, “We follow the prescribed sanitation process. The glasses are cleaned at regular intervals before reuse. All precautions are taken to maintain hygiene.” 

A source said, “Some cinema halls do take precautions, but it is not possible to check every person and is difficult to send an infected person back.” 

“There are two kinds of glasses cinema halls provide. The price of these glasses ranges from Rs 150 to Rs 750, which the theatre owners spend from their own pocket, so it is not possible for them to throw them away after every show,” the source added.

See the original story here: http://timesofindia.indiatimes.com/city/mumbai/3D-glasses-spreading-conjunctivitis-BMC/articleshow/8956601.cms

Focus 360 Launches Immersive 3D TV Technology at 2011 Pacific Coast Builder’s Conference (PCBC)

 

[by PR Web]

How do you help potential buyers visualize their future home before turning over the first shovel of dirt? Prior to the recession, most builders answered that question with a model home. But with the convergence of high definition video, a growing 3D consumer television market and a smaller builder pool with reduced marketing budgets, the model home as we know it may eventually be replaced by the virtual model home.

That’s where Focus 360, an award-winning architectural visualization firm based in Laguna Niguel, Calif., enters the scene.

On June 22, 2011, Focus 360 will unveil its immersive 3D TV technology at the 2011 Pacific Coast Builder’s Conference (PCBC) in San Francisco. At booth #5523, Focus 360 will be giving three-minute demonstrations of both interiors and exterior immersive tours from various communities throughout California, using the new Samsung 55-inch LED 1080P High Definition screen and Bluetooth-enabled 3D glasses. The demo can be found on YouTube’s 3D Channel here, but viewers will need 3D glasses.

Unlike the last generation of “3D” home tours, which were typically shown on 2D platforms, Focus 360’s immersive 3D TV technology uses the latest in 3D television equipment, giving prospective homebuyers the opportunity to see kitchen islands and bathroom fixtures leap off the screen for a true “virtual reality” experience. With the help of 3D glasses that separate right and left images, they can move through each room, getting a sense of the actual width and height of doorways, or feel as though they are actually brushing against a kitchen countertop.

“As display technology became more affordable and the technology finally caught up with the idea of ‘immersing yourself in a computer generated world,’ we saw an opportunity to take our virtual model tours to the next step,” said Steve Ormonde, co-founder of Focus 360. “When you enter a virtual model home today, it’s almost indistinguishable from the real thing. It’s easily mistaken for real video of the product.”

How It Works 
The immersive tours are 100% computer generated, created by Focus 360’s talented team of artists, architects, animators and programmers. They often start with CAD floorplans and material specifications, but can take something as simple as a napkin sketch and transform it into 3D. The process begins when the information is converted into a basic 3D model. The client sees their design for the first time in what is called an “animatic.” This preview assures the final video is covering all areas that are important and can frequently point out shortcomings in the architectural design. From there, the 3D model is embellished with finish materials, interior design elements and special effects. Once completed, the 3D model becomes the basis for the immersive 3D tours as well as renderings and web content.

Virtual Model Home Tours in Action: Signal Hill, Brea, Santa Barbara

Santa Ana-based City Ventures is the first developer to exclusively use the immersive 3D TV technology instead of model homes. Currently, the company is using it at three Southern California neighborhoods, including Long Beach’s Signal Hill, Brea Downtown Collection and Santa Barbara’s East Beach Collection. A typical tour experience at Signal Hill, for example, begins as the prospective buyer steps through a choreographed interactive sales presentation. It starts in 2D with an animated video of the community. From there, it progresses to a review of floor plans and options offered. At this stage, the salesperson can choose to give the buyer a tour of the home, either in the traditional animated 2D video or in the new immersive 3D video.

Herb Gardner, president of City Ventures’ Homebuilding Group, says they were primarily motivated by two factors: innovation and cost savings.

“When we created City Ventures, we knew we wanted to be innovative and different,” said Gardner. “Homebuilders have been marketing and selling homes the same way for 50 years, but technology has gotten us to a point where we don’t have to see the house in reality anymore. And because home prices are down 50%, we also had to look at how we could get our costs down. When you start factoring in the cost of maintaining and operating a model home over the life of a project, it can be very expensive.”

Joe McEachern, who bought a two-bedroom condo at East Beach Collection in Santa Barbara, says the look of City Ventures’ virtual tour was instrumental in his decision to buy. In fact, the virtual tour was so real that when it came time to choose his upgrades, he wanted the kitchen cabinetry and bathroom shower to match the same features shown in the virtual tour.

“I wanted that same color and that same look I saw in the virtual tour,” said McEachern, a 40-something data administrator who is not shy when it comes to technology. “When all you have is dirt at a construction site, it’s almost impossible to buy a home that you can’t see or touch. But the virtual tour is very comprehensive. I must have looked at the video a thousand times. I even turned it into a screen saver and put it on my computer’s rotating wallpaper.”

Now that McEachern has been watching his home being constructed (move-in isn’t expected until September), he believes the virtual tour was “an accurate portrayal of the home” he bought.

“There’s an agreement between the virtual tour and the reality of the construction as it’s unfolding,” he said.

The technology has been so successful with tech-savvy buyers like McEachern that City Ventures plans to add seven more communities across California in the next six months.

Cost Savings

Virtual model home tours not only mean cost savings for the developer, but also for the buyer. A typical 3D TV immersive tour costs between $8,000 and $10,000 per floorplan (a typical community has three or four floorplans). Construction, merchandising and maintenance of a full-scale model home can cost as much as $500,000, over the life of a project–a cost that’s typically factored into the price of the homes. On a project of 50 units, that’s $10,000 a unit.

Future Demand

Interest and excitement about this new technology is high. As the new home market regains strength and momentum, immersive 3D will likely become the industry standard for how forward thinking homebuilders market their new neighborhoods and home designs.

“As we are emerging from the recession, the builders we are working with no longer have the luxury of large marketing budgets and model homes for every floorplan,” said Ormonde. “But there is still that fundamental disconnect between a builder selling a home without a model and the consumer’s ability to understand floorplans. Our immersive 3D TV technology bridges that gap.”

Added McEachern: “For new construction, I can’t see it going any other way. 3D virtual tours are the new standard.”

About Focus 360

Using a variety of media and design tools to visualize what has not yet been built, Focus 360’s team of artists, architects, animators and programmers create photorealistic illustrations, architectural renderings and 3D animations from building plans for residential, commercial, and mixed use developments. The combined experience and talent has catapulted Focus 360 into the top tier of architectural visualization companies worldwide. Focus 360’s international client list reads like a “who’s who” in the real estate industry, including: TDIC, Renaissance, Starwood Capital, Ritz Carlton, Brookfield, Lennar, Rancho Mission Viejo and McCarthy Construction.

Focus 360 is located at 27721 La Paz, Laguna Niguel, CA 92677. 800-490-1621 www.focus360.com.

See the original post here: http://www.sfgate.com/cgi-bin/article.cgi?f=/g/a/2011/06/21/prweb8583256.DTL

< PREVIOUS ARTICLES NEXT ARTICLES >

Specification for Naming VFX Image Sequences Released

ETC’s VFX Working Group has published a specification for best practices naming image sequences such as plates and comps. File naming is an essential tool for organizing the multitude of frames that are inputs and outputs from the VFX process. Prior to the publication of this specification, each organization had its own naming scheme, requiring custom processes for each partner, which often resulted in confusion and miscommunication.

The new ETC@USC specification focuses primarily on sequences of individual images. The initial use case was VFX plates, typically delivered as OpenEXR or DPX files. However, the team soon realized that the same naming conventions can apply to virtually any image sequence. Consequently, the specification was written to handle a wide array of assets and use cases.

To ensure all requirements are represented, the working group included over 2 dozen participants representing studios, VFX houses, tool creators, creatives and others.  The ETC@USC also worked closely with MovieLabs to ensure that the specification could be integrated as part of their 2030 Vision.

A key design criteria for this specification is compatibility with existing practices.  Chair of the VFX working group, Horst Sarubin of Universal Pictures, said: “Our studio is committed to being at the forefront of designing best industry practices to modernize and simplify workflows, and we believe this white paper succeeded in building a new foundation for tools to transfer files in the most efficient manner.”

This specification is compatible with other initiatives such as the Visual Effects Society (VES) Transfer Specifications. “We wanted to make it as seamless as possible for everyone to adopt this specification,” said working group co-chair and ETC@USC’s Erik Weaver. “To ensure all perspectives were represented we created a team of industry experts familiar with the handling of these materials and collaborated with a number of industry groups.”

“Collaboration between MovieLabs and important industry groups like the ETC is critical to implementing the 2030 Vision,” said Craig Seidel, SVP of MovieLabs. “This specification is a key step in defining the foundations for better software-defined workflows. We look forward to continued partnership with the ETC on implementing other critical elements of the 2030 Vision.”

The specification is available online for anyone to use.

Oops, something went wrong.