News Stories

Utopia (Benelux) installs 45 MasterImage 3D systems

New 3D Deal with Utopia / Utopolis for FTT

The Benelux-based group is planning to boost its 3D business with 45 MasterImage 3D installations.

As the very first exhibitor to have projected digital 3D at its main sites in the Benelux countries, Utopia / Utopolis Group, one of the major cinema circuits in Belgium, Holland and Luxembourg, entered into a deal with FTT Benelux S.A., youngest member of the FTT family, for the supply and installation of 45 MasterImage 3D digital cinema systems. Moreover, FTT also won the bid for the supply and installation of all silver screens for the group.

Thomas Rüttgers, Managing Partner of FTT group said: “We are very happy that our new subsidiary will implement its first long-time project together with Utopolis. They have been our customers for such a long time already and we are delighted that they have expressed their confidence in us one more time.”

Nico Simon, General Manager of Utopia S.A. added: “Having tested different options we think that the MasterImage 3D solution is the one that suits our requirements best and look forward to co-operating with FTT once again. For us it was surely a crucial factor that they have a relevant experience in digital 3D installations and branch offices close to our cinemas.”

Brian Kercher, Managing Director of MasterImage 3D Europe Cinema concludes: “3D is one of the important drivers of digital cinema and it surely stimulated the demand for digital cinema equipment. We are proud to work with FTT and Utopolis on this project as they are both renowned companies in their respective markets.”

The roll-out for Utopolis will start in December with the installations in Luxembourg and will then be carried out step by step in several waves. However, at least 4 to 6 screens will be equipped by the end of this year.

source: http://www.dcinematoday.com/dc/pr.aspx?newsID=2106

“Avatar” Blu-ray 3D best 3D yet

I have seen the first Blu-ray 3D movie that could do what consumer electronics companies have been hoping would happen – drive me to buy a 3D TV and Blu-ray 3D player just to get and watch that movie, which is “Avatar.”

This is the OMG! disc the industry needs so badly.
Clearly Panasonic knew what it had in this disc that the company’s Panasonic Hollywood Laboratory also authored with lots of input and oversight by director James Cameron.
And clearly Cameron wasn’t joking when he told an audience a couple weeks ago that it looks as good on a 3DTV as it looked in theaters.
I would actually argue that it looks better, way better!

Since Nov. 1 the “Avatar” Blu-ray 3D disc has only been available in Europe only with the purchase of a Panasonic Blu-ray 3D player or 3DTV. I’ve been reporting for months that it will be available the same way here in the U.S. beginning Dec. 1, and only available that way for about a year. Panasonic and Fox have yet to confirm the Dec. 1 date for the U.S.

But I just discovered a new posting by Panasonic about special “Avatar” viewing settings for the Panasonic plasma 3D TV as recommended by Cameron to optimize the experience.

Many people have seen footage from “Avatar” on a demo disc at conferences and other industry and media events for months, which is impressive but nowhere near as dynamic and compelling as the actual movie disc that I had a chance to watch this week on a 60-inch 3D plasma display.

I saw 20-minutes of “Avatar” at Comic-Con in 2009; I saw the movie at the Hollywood premiere at the Chinese Theater last year; I saw it again at a giant-screen IMAXtheater at Universal Citywalk, where the 3D was far more impacting than on a traditional screen. And I saw both 2D Blu-ray versions, which I feel have images that are even more vivid than the theatrical 3D versions, probably because the TV screen is inherently brighter than watching on a theater screen through dark glasses.

But none of those experiences was anything like the Blu-ray 3D version I saw this week, which instantly immersed me in the world of Pandora beginning with the stunning main menu page. Finally, the 3D made me feel like I was in experiencing this world rather than observing. And everything had far more depth and clarity than any other version. When the two main characters run across the log in the forest, this was the first time I really felt the danger of the plunging depth below them, which also drew my eyes to a waterfall down below to the left that I had never seen before. The bright and colorful wood sprites felt as if they were flittering much more closely to me. I wanted to remain in this world and instantly watch all my favorite movies in this way.
This is much closer to the 3D experience I have always sought and have thus far only found in documentary films at IMAX giant-screen theaters. I was hoping Hollywood would be able to deliver that same sensation with its more personal, fictional stories, but so far that has not been the case, not even the theatrical release of “Avatar.” Next week’s “Tangled” comes about the closest I have seen so far.
Having just watched about a dozen of the most recent Blu-ray 3D titles released this week (Zemeckis’ Christmas Carol, Polar Express; IMAX documentaries from Image/WarnerWarner’s Clash of Titans, Cats & Dogs w/ Road RunnerSony’s FIFA 2010 World Cup, Open Season, Monster House), with varying quality but none better than slightly above average, I did not think Blu-ray 3D would be the medium that would wind up coming closest to meeting my expectations.
That was until I saw the Blu-ray 3D of “Avatar,” which was followed shortly thereafter by a call to Best Buy to see if that current price of $1,799 for a Panasonic 3D package including a 50-inch 3D TV, Blu-ray 3D player, two pairs of 3D glasses, and two Blu-ray 3D movies will still be good after Dec. 1.

by Scott Hettrick

view full story with more graphics here: http://hollywoodinhidef.com/2010/11/avatar-blu-ray-3d-best-3d-yet/

< PREVIOUS ARTICLES NEXT ARTICLES >

Specification for Naming VFX Image Sequences Released

ETC’s VFX Working Group has published a specification for best practices naming image sequences such as plates and comps. File naming is an essential tool for organizing the multitude of frames that are inputs and outputs from the VFX process. Prior to the publication of this specification, each organization had its own naming scheme, requiring custom processes for each partner, which often resulted in confusion and miscommunication.

The new ETC@USC specification focuses primarily on sequences of individual images. The initial use case was VFX plates, typically delivered as OpenEXR or DPX files. However, the team soon realized that the same naming conventions can apply to virtually any image sequence. Consequently, the specification was written to handle a wide array of assets and use cases.

To ensure all requirements are represented, the working group included over 2 dozen participants representing studios, VFX houses, tool creators, creatives and others.  The ETC@USC also worked closely with MovieLabs to ensure that the specification could be integrated as part of their 2030 Vision.

A key design criteria for this specification is compatibility with existing practices.  Chair of the VFX working group, Horst Sarubin of Universal Pictures, said: “Our studio is committed to being at the forefront of designing best industry practices to modernize and simplify workflows, and we believe this white paper succeeded in building a new foundation for tools to transfer files in the most efficient manner.”

This specification is compatible with other initiatives such as the Visual Effects Society (VES) Transfer Specifications. “We wanted to make it as seamless as possible for everyone to adopt this specification,” said working group co-chair and ETC@USC’s Erik Weaver. “To ensure all perspectives were represented we created a team of industry experts familiar with the handling of these materials and collaborated with a number of industry groups.”

“Collaboration between MovieLabs and important industry groups like the ETC is critical to implementing the 2030 Vision,” said Craig Seidel, SVP of MovieLabs. “This specification is a key step in defining the foundations for better software-defined workflows. We look forward to continued partnership with the ETC on implementing other critical elements of the 2030 Vision.”

The specification is available online for anyone to use.

Oops, something went wrong.